Since 1.3 a new general synthesizer module has been included. This designed to replace the older diphone synthesizer described in the next chapter. A redesign was made in order to have a generalized waveform synthesizer, singla processing module that could be used even when the units being concatenated are not diphones. Also at this stage the full diphone (or other) database pre-processing functions were added to the Speech Tool library.
The Unisyn synthesis modules can use databases in two basic formats, separate and grouped. Separate is when all files (signal, pitchmark and coefficient files) are accessed individually during synthesis. This is the standard use during databse development. Group format is when a database is collected together into a single special file containing all information necessary for waveform synthesis. This format is designed to be used for distribution and general use of the database.
A database should consist of a set of waveforms, (which may be translated into a set of coefficients if the desired the signal processing method requires it), a set of pitchmarks and an index. The pitchmarks are necessary as most of our current signal processing are pitch synchronous.
Pitchmarks may be derived from laryngograph files using the our
proved program `pitchmark' distributed with the speech
tools. The actual parameters to this program are still a bit of
an art form. The first major issue is which direction the lar
files. We have seen both, though it does seem to be CSTR's ones
are most often upside down while others (e.g. OGI's) are the right way
up. The -inv argument to `pitchmark' is specifically
provided to cater for this. There other issues in getting the
pitchmarks aligned. The basic command for generating pitchmarks
is
pitchmark -inv lar/file001.lar -o pm/file001.pm -otype est \
-min 0.005 -max 0.012 -fill -def 0.01 -wave_end
The `-min', `-max' and `-def' (fill values for unvoiced regions), may need to be changed depending on the speaker pitch range. The above is suitable for a male speaker. The `-fill' option states that unvoiced sections should be filled with equally spaced pitchmarks.
LPC coefficients are generated using the `sig2fv' command. Two stages are required, generating the LPC coefficients and generating the residual. The prototypical commands for these are
sig2fv wav/file001.wav -o lpc/file001.lpc -otype est -lpc_order 16 \
-coefs "lpc" -pm pm/file001.pm -preemph 0.95 -factor 3 \
-window_type hamming
sigfilter wav/file001.wav -o lpc/file001.res -otype nist \
-lpcfilter lpc/file001.lpc -inv_filter
For some databases you may need to normalize the power. Properly normalizing power is difficult but we provide a simple function which may do the jobs acceptably. You should do this on the waveform before lpc analysis (and ensure you also do the residual extraction on the normalized waveform rather than the original.
ch_wave -scaleN 0.5 wav/file001.wav -o file001.Nwav
This normalizes the power by maximizing the signal first then multiplying it by the given factor. If the database waveforms are clean (i.e. no clicks) this can give reasonable results.
The diphone index consists of a short header following by an ascii list of each diphone, the file it comes from followed by its start middle and end times in seconds. For most databases this files needs to be generated by some database specific script.
An example header is
EST_File index DataType ascii NumEntries 2005 IndexName rab_diphone EST_Header_End
The most notable part is the number of entries, which you should note can get out of sync with the actual number of entries if you hand edit entries. I.e. if you add an entry and the system still can't find it check that the number of entries is right.
The entries themselves may take on one of two forms, full entries or index entries. Full entries consist of a diphone name, where the phones are separated by "-"; a file name which is used to index into the pitchmark, LPC and waveform file; and the start, middle (change over point between phones) and end of the phone in the file in seconds of the diphone. For example
r-uh edx_1001 0.225 0.261 0.320 r-e edx_1002 0.224 0.273 0.326 r-i edx_1003 0.240 0.280 0.321 r-o edx_1004 0.212 0.253 0.320
The second form of entry is an index entry which simply states that reference to that diphone should actually be made to another. For example
aa-ll &aa-l
This states that the diphone aa-ll should actually use the
diphone aa-l. Note they are a number of ways to specify
alternates for missing diphones an this method is best used for fixing
single or small classes of missing or broken diphones. Index
entries may appear anywhere in the file but can't be nested.
Some checks are made one reading this index to ensure times etc are reasonable but multiple entries for the same diphone are not, in that case the later one will be selected.
There two major types of database grouped and ungrouped. Grouped databases come as a single file containing the diphone index, coeficinets and residuals for the diphones. This is the standard way databases are distributed as voices in Festoval. Ungrouped access diphones from individual files and is designed as a method for debugging and testing databases before distribution. Using ungrouped dataabse is slower but allows quicker changes to the index, and associated coefficient files and residuals without rebuilding the group file.
A database is declared to the system through the command
us_diphone_init. This function takes a parameter list of
various features used for setting up a database. The features are
name
index_file
grouped defines the distinction
between this being a group of simple index file.
grouped
"true" or "false". This defined
simple index or if the index file is a grouped file.
coef_dir
sig_dir
coef_ext
".lpc" for LPC
file and ".pm" for pitchmark files.
sig_ext
".res" for LPC residual
files and ".wav" for waveform files.
default_diphone
alternates_left
alternates_right
An example database definition is
(set! rab_diphone_dir "/projects/festival/lib/voices/english/rab_diphone")
(set! rab_lpc_group
(list
'(name "rab_lpc_group")
(list 'index_file
(path-append rab_diphone_dir "group/rablpc16k.group"))
'(alternates_left ((i ii) (ll l) (u uu) (i@ ii) (uh @) (a aa)
(u@ uu) (w @) (o oo) (e@ ei) (e ei)
(r @)))
'(alternates_right ((i ii) (ll l) (u uu) (i@ ii)
(y i) (uh @) (r @) (w @)))
'(default_diphone @-@@)
'(grouped "true")))
(us_dipohone_init rab_lpc_group)
The function us_make_group_file will make a group file
of the currently selected US diphone database. It loads in all diphone
sin the dtabaase and saves them in the named file. An optional
second argument allows specification of how the group file will
be saved. These options are as a feature list. There
are three possible options
track_file_format
est_binary, currently the only other alternative is est_ascii.
sig_file_format
snd (Sun's Audio format). This was choosen as it has
the smallest header and supports various sample formats. Any format
supported by the Edinburgh Speech Tools is allowed.
sig_sample_format
mulaw. This is suitable when the signal files are LPC
residuals. LPC residuals have a much smaller dynamic range that
plain PCM files. Because mulaw representation is half the size
(8 bits) of standard PCM files (16bits) this significantly reduces
the size of the group file while only marginally altering the quality of
synthesis (and from experiments the effect is not perceptible). However
when saving group files where the signals are not LPC residuals (e.g.
in PSOLA) using this default mulaw is not recommended and
short should probably be used.
In a voice selection a UniSyn database may be selected as follows
(set! UniSyn_module_hooks (list rab_diphone_const_clusters )) (set! us_abs_offset 0.0) (set! window_factor 1.0) (set! us_rel_offset 0.0) (set! us_gain 0.9) (Parameter.set 'Synth_Method 'UniSyn) (Parameter.set 'us_sigpr 'lpc) (us_db_select rab_db_name)
The UniSyn_module_hooks are run before synthesis, see the next
selection about diphone name selection. At present only lpc
is supported by the UniSyn module, though potentially there may be
others.
An optional implementation of TD-PSOLA moulines90 has been written but fear of legal problems unfortunately prevents it being in the public distribution, but this policy should not be taken as acknowledging or not acknowledging any alleged patent violation.
Diphone names are constructed for each phone-phone pair in the Segment
relation in an utterance. If a segment has the feature in forming a
diphone name UniSyn first checks for the feature us_diphone_left
(or us_diphone_right for the right hand part of the diphone) then
if that doesn't exist the feature us_diphone then if that doesn't
exist the feature name. Thus is is possible to specify diphone
names which are not simply the concatenation of two segment names.
This feature is used to specify consonant cluster diphone names
for our English voices. The hook UniSyn_module_hooks is run
before selection and we specify a function to add us_diphone_*
features as appropriate. See the function rab_diphone_fix_phone_name
in `lib/voices/english/rab_diphone/festvox/rab_diphone.scm' for
an example.
Once the diphone name is created it is used to select the diphone from
the database. If it is not found the name is converted using the list
of alternates_left and alternates_right as specified in
the database declaration. If that doesn't specify a diphone in the
database. The default_diphone is selected, and a warning is
printed. If no default diphone is specified or the default diphone
doesn't exist in the database an error is thrown.
Go to the first, previous, next, last section, table of contents.